Be careful to not touch the glass of the new bulb because the oil on your hands will cause the life of the bulb to be shortened. That's one of the reasons why your Hyundai Accent is equipped with well-functioning headlights. It is in the middle of a round rubber piece on the back of the headlight: Headlight electrical connector location Do your best to grasp the plastic connector versus the wires and pull the electrical connector straight off the back of the headlight. They give you the option to use a high beam or a low one to increase your visibility in various conditions. You may need to pull one ear a bit and then the other. The Front Turn Signal light is located at the inner corner of the assembly.
You surely won't encounter any problem in finding a replacement Hyundai Accent headlights. Grab one of the ears with a pliers and pull it straight off. Even before Federal standards were made and implemented, safety has long been a concern of most automakers. Follow along to learn how I figured out how to change Hyundai Accent headlight bulb. Installed in the utmost front of the car and in line with the grille, the Hyundai Accent headlights emit a beam of light to illuminate the road ahead of you especially when driving at night or in dark places.
Push the grey plastic electrical connector straight on to the base of the turn signal bulb socket until it clicks securely in place. Swing the metal retaining arm closed and re-attach the left end to the hook. Having Hyundai Accent headlights that are properly functioning is very vital in attaining comfort and driving safety. Pull the black plastic electrical connector straight off the base of the old headlight bulb. You will need some finger dexterity and maybe a small screwdriver, but you don't have to pay a technician a labor charge to install it for you. For more, check out my other. For a more attractive look, headlight covers are subtle additions that can surely create a serious styling impact.
Reinstalling the rubber boot Rubber Boot Reinstalled Step 7: Reconnect the electrical connector. If you do get the new bulb dirty, wipe it clean with an alcohol moistened paper towel. If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal. My connector is missing the back plastic piece that snaps on the top of the wires. It kind of snaps on the back like a Tupperware lid.
These Hyundai Accent headlight covers aren't only ornaments; they are also good headlight protectors. The connector just pushes straight on: Reconnecting the electrical connector Electrical connector reconnected Step 8: Test your headlights. Try to avoid touching the glass part of the new halogen headlight bulb with your fingers or anything greasy in the engine bay. The hinge was on the upper outside corner and the spring hooked under the lower inside corner: Unhook the spring clip as shown above Spring clip unhooked Once you have the spring unhooked you can see how it is hinged on the other end and you can rotate it up and out of the way. In fact, many vehicle safety features like rearview mirror, shock absorbers, electric horn, laminated windshield glass and twin-beam headlights were among the oldest inventions in automotive technology. Access the headlight bulb here Step 2: Disconnect the headlight electrical connector. Hyundai Accent is a car that's designed to accompany you in your daily commute.
Like all light bulbs, headlight bulbs will eventually burn out. Please help support this website by shopping at. Push the black plastic power plug on to the base of the new bulb. The first two steps are to open the hood and then move to the side of the vehicle with the burnt out headlight bulb. No tools are needed to change any of the bulbs in the headlight housings on either the driver or passenger side of the vehicle.
. The single prong is at the top. Donations are not tax deductible. There are many different headlight bulb options in terms of brightness, color, and down-road visibility, so you can find a bulb for your repair. Test the new light bulbs by turning on the headlights, activating the hazard signals and flashing the high beams.
The Front Side Marker light is located at the outer edge of the headlight assembly. But this automobile really counts on the Hyundai Accent headlight to light their way and make their every journey safe. And driving with faulty or damaged headlights could mean a compromise in the safety of the vehicle and all its occupants. If necessary, you may also replace it with any other miniature wedge base bulbs such as the number , W5W, 158, 194 or a compatible unit. Here is a good picture of my new bulb installed and locked in place note the arrow pointing up, the picture was actually taken at an angle : The new headlight bulb latched in place Bulb reinstalled and latched in place from behind Step 6: Reinstall the rubber boot. The bulb has three tabs on it that fit into slots in the headlight and the single electrical tab will be oriented at the top of the bulb when installed.
Pull the old headlight bulb out of the socket. Both headlights work now I love questions and comments and respond to all. At present, there are more than 60 National Highway Traffic and Safety Administration Standards that directly affect vehicle safety. Your headlight bulb ensures clear vision in poor weather conditions or at night. If you have a headlight that has started to dim or has burned out, it should be replaced as soon as possible for your safety. Replacing the headlight in your Hyundai Accent may at first seem to be an easy task--that is, until you open the hood and have to figure out how to take everything apart to replace the small halogen bulb.
The dual filament low and high beam headlight bulb is located near the center of the housing. It would be way too risky to drive a car with defective headlights because it is inevitable to pass by dark and deserted pavements. Reach in behind the housing and press the release tab on the grey power plug before sliding it straight off. If ever one of your Hyundai Accent headlights becomes damaged have it repaired or replaced immediately. Before you close everything up you should test out your headlights. Step 2: Locate the place where you access the back of the headlight. Press the left end of the retaining arm towards the front of the vehicle and remove it from the hook.